Terms
Advertise   Support WW    Contact   
Results 1 to 3 of 3
  1. #1
    Weed Watcher
    Join Date
    Feb 2012
    Location
    Over the water
    Posts
    128
    Status
    jimmi007 is offline
    Country
    England
    Liked
    208 times
    Found this explaining

    Chelating Agents

    The word chelate (pronounced: "key-late") comes from the Greek word "chele" which literally means "claw". The word chelate was first used by researchers in the 1920s because it describes the principal of grasping and holding something, which is essentially what occurs in the process of chelation. Growers who primarily focus on Nitrogen, Phosphorous, and Potassium often overlook the importance of other elements. Trace nutrients are described as being necessary for plant growth, although in small quantities. Without the use of chelates many of these nutrients would be unavailable to plants. In fact, many of the minerals we ingest in our diets are chelated. It's pretty safe to say that our existence is somewhat dependent on principles of chelation.
    Here is a basic example of the role chelates play in making nutrients available to plants:
    Many trace elements in their basic form(s) are unavailable to plants. This is largely due to the fact that these metals, such as iron, are positively charged. The pores (openings) on the plants' leaves and roots are negatively charged. As a result, there is a problem with the fixation of positively charged minerals at the negatively charged pores (the element can't enter the plant due to the difference in charges). However, if a chelate is added with an element like iron it effectively encapsulates (surrounds) the metal/mineral ion and changes the charge into a negative or neutral charge, allowing the element to enter the pore and travel into the plant. Some chelating agents may only have the ability to partially surround an element and should be referred to as a "complexes", while those that completely surround the mineral are true chelates.
    Now, if you pick up your container of fertilizer and have a look at the label you should see "EDTA" beside some of the trace elements. If you also see "DTPA" you are using a more complex fertilizer. If you see "EDDHA" beside iron, you are using a very high quality fertilizer. There are a couple of other synthetic chelates, but are not commonly used so will not be discussed. If you use an organic fertilizer, don't worry we'll get to that.
    Ethylenediaminetetraacetate (EDTA) is the most common chelating agent found in synthetic fertilizers. Like other synthetic chelates, EDTA is an alien compound to the plant and is therefore not absorbed by the plant. When the chelated element (remember it's encapsulated) is required, the plant will remove the element, for example iron, form
    the chelate and absorb the element. However, since the chelating agent is foreign to the plant, it will give up the chelating agent (EDTA) back into solution where it is free to chelate other positively charged elements. EDTA has four points of connection to the elements it chelates. Different chelates have varying numbers of points of connection. In some situations four points of connection may hold the element too tightly, where in other growing situations, it may not hold it tight enough.
    For example, EDTA is better suited to slightly lower than neutral pH levels. Iron often becomes deficient at higher pH values such as those typically associated with rockwool or mineral soils.
    Diethylenetriaminepentaacetate (DTPA)is a chelating agent better suited to high pH levels. As the chemical name suggests, it has five (penta, ie. Pentagram) points of connection to the element it chelates. DTPA is more costly than EDTA and is less soluble so it is found in smaller quantities than EDTA in most synthetic fertilizer formulations.
    Several studies suggest that ethylenediaminedihydroxy-phenylaceticacid (EDDHA) is that superior synthetic chelating agent. Its relatively high cost prohibits it from being added to many synthetic fertilizer formulations. In a recent study conducted by the Research Station for Floriculture and Glasshouse Vegetables (Netherlands) it was demonstrated that plants perform better, even under adverse conditions when the primary source of iron is chelated by EDDHA. In the experiment, chrysanthemums were grown aeroponically, and a portion of the plants were inoculated (infected) with a root disease (pythium). Only four percent of the plants infected with pythium demonstrated chlorosis (yellowing of leaves associated with iron deficiency) when supplied with EDDHA. In comparison, 35% of the plants supplied with DTPA became chlorotic, and 18% of the plants supplied with HEDTA demonstrated chlorosis.
    As a result, the dry weights of plants supplied with EDDHA were significantly higher in both infected and uninfected plants. An additional benefit found in tissue analysis showed that the plants supplied with EDDHA were able to absorb 2X the levels of zinc than the plants supplied with HEDTA and DTPA. This is significant to our purposes because zinc (and iron) is often locked out in the later part of flowering due to excessive phosphorous levels. Ever
    notice how yellow plants can get as harvest approaches?
    O.K., so now we have an idea how chelates work, and that not all synthetic chelates are equal in their abilities to supply nutrients to the plant. But, how do these nutrients enter the plant in nature, where EDTA, DTPA and EDDHAare not present in the soil?
    Fulvic acid is a biological chelating agent. It results from the decomposition of organic matter into humus, which is microbially processed into humic acids, microbe's further process the humic acids to produce fulvic acid. Fulvic acids are lighter in weight and more biologically active than their precursor, humic acids. Weighing between 7,000 to 70,000 Daltons, fulvic acids are very light when compared to their humic counterparts weighing up 700,000 Daltons. They are also much more biologically active. In simplest terms, humic acids are associated with the physical characteristics of soil, and fulvic acids are associated more closely with the plants biochemical reactions influencing the plants metabolism. It's a question of feeding the soil or feeding the plant. Fulvic acid forms a four-point bond with the elements it chelates.
    One of the greatest advantages in adding a biological chelate such as high quality fulvic acid to your nutrient solution is that unlike the synthetic chelates likely present in your nutrients, the fulvic acid chain can be absorbed into the plant. This is advantageous for several reasons. The principal benefit is that the mobility of some nutrients within the plant increase. It is true that some elements required by the plant are used more quickly than they can be transported. Leaf tip burn in lettuce appears as a result of a localized calcium deficiency. During warm weather (often found in grow rooms), the plant uses calcium faster than it can be transferred to the growing points, resulting in a deficiency although calcium is being taken up at the roots. With the addition of fulvic acid, the calcium is encapsulated by the fulvic acid chain, and will move more freely, thus reducing the incidence of tip burn.
    Where fulvic acids really shine is when the growing environment in the root zone (rhizosphere) becomes above or below optimal. The chelating and transport ability of fulvic acid in high or low pH and TDS ranges is affected very little in comparison to the synthetic counterparts such as EDTA. Plants supplied a nutrient diet containing fulvic acid are far less likely to exhibit signs of deficiency or stress during adverse conditions than plants supplied a diet without fulvic acid. Not only does fulvic acid improve the transport of fertilizer minerals within the plant, but it also helps to transport other plant fluids more efficiently, including those responsible for terpines (smell and flavour) and resin production. Here is a tip: lightly spray high quality fulvic acid on the plants one week prior to harvest. Apply only once. You should see a tremendous increase in the appearance of plant resins. This works wonderfully for all those dedicated to growing the highest quality herbs.
    Like the synthetic chelates, not all fulvic acids are equal in their effectiveness. Lets say you had two bottles of fulvic acid and they both contained 100 chains of fulvic acid. If bottle "A" had a higher percentage of lighter weight molecules, say between 7000 to 12,000 Daltons it would be much more effective than bottle "B" containing a higher percentage of molecules in the 12,000 to 50,000 Dalton size range. The percentage of light weight molecules is largely determined by the source of raw materials and the processe(s) used for extraction.
    Another category of biological chelating agents includes amino acids. Amino acids can function very well in chelating, as they are similar to a magnet in that they are have both a negative and positive charge (like north and south poles). In chealation, amino acids form a five point bond with the mineral element. This allows amino acid chelates to function well do to their relative stability.
    So now we have a better understanding of the role chelates play in nutrient absorbtion. We have also learned that different chelating agents will function differently in delivering nutrients to their target. It is best to have several sources of chelation in you nutrient solution, including biologicals. This allows for more efficient nutrient absorbtion, transport, and other biochemical reactions. Look for nutrients that offer a range of chelateing compounds, so that nutrients will be available through a wide range of conditions, including those above or below optimal. For increased results you may consider the addition of supplements such as fulvic, humic, and amino acids.Recently, a grower reported having to turn-on their ozone system during the vegetative growth phase after they began adding
    fulvic acid to their usual nutrient regimen.

  2. #2
    Weed Watcher
    Join Date
    Feb 2012
    Location
    Over the water
    Posts
    128
    Status
    jimmi007 is offline
    Country
    England
    Liked
    208 times

  3. #3
    OG/TSD Refugee
    Join Date
    Mar 2011
    Location
    On my porch toking on my pipe
    Posts
    1,657
    Status
    hippie420 is offline
    Gender
    Male
    Country
    United States
    Liked
    3189 times
    great info Jimmy! K+ bro
    "There he goes. One of God's own prototypes. A high-powered mutant of some kind never even considered for mass production. Too weird to live, and too rare to die." Hunter S. Thompson
    Overgrow Original | Sp3cialSt3v3420 | 2001 - 2006 | Overgrow The World
    TSD OG 2011-2013 | Hippie420 | Former Forums Manager

Similar Threads

  1. Border agents seize nearly 13 tons of marijuana
    By Dublinskunkfiend in forum Marijuana News Topics
    Replies: 0
    Last Post: 12-07-2012, 10:35 PM
  2. Federal Agents Target O.C. Medical-Marijuana Chain
    By Dublinskunkfiend in forum Marijuana News Topics
    Replies: 0
    Last Post: 10-26-2012, 10:22 AM
  3. Eight charged with selling marijuana to undercover agents in Monroe
    By Dublinskunkfiend in forum Marijuana News Topics
    Replies: 0
    Last Post: 07-28-2012, 04:05 AM
  4. USBP agents seize 847 lbs. of marijuana
    By Dublinskunkfiend in forum Marijuana News Topics
    Replies: 0
    Last Post: 07-25-2012, 02:57 AM
  5. Laredo North Agents Seize 1569 Pounds of Marijuana
    By Dublinskunkfiend in forum Marijuana News Topics
    Replies: 0
    Last Post: 07-17-2012, 02:48 PM

Tags for this Thread


  
ALL content is for informational and educational purposes only,
and intended for visitors 18 Years of age and Older!


  Copyright ©2007-2019 WeedWatch.com Powered by Cannavelli Brands LLC. Sponsors | Link Partners   xhtml valid   Subscribe to Weed Watch Magazine's RSS Feed   
BACK TO TOP