Terms
Advertise   Support WW    Contact   
Results 1 to 9 of 9
  1. #1
    OG/TSD Refugee
    Join Date
    Mar 2011
    Location
    On my porch toking on my pipe
    Posts
    1,657
    Status
    hippie420 is offline
    Gender
    Male
    Country
    United States
    Liked
    3189 times
    Parts list:
    8 1/2 adapters
    8 elbow with side outlet
    130-170 gph sub. pump
    Black 1/2 ID Tubing
    3 1/2 barbs
    4 4ft 1/2 pvc tubing
    1 tub from concrete section of lowes (the smaller one)
    super glue
    Duct tape
    10 Gallon rubber maid res.

    You get 8 of each


    Then you screw them together like this and end up with 8 elbows

    You get four 4 foot 1/2 pvc tubing
    "There he goes. One of God's own prototypes. A high-powered mutant of some kind never even considered for mass production. Too weird to live, and too rare to die." Hunter S. Thompson
    Overgrow Original | Sp3cialSt3v3420 | 2001 - 2006 | Overgrow The World
    TSD OG 2011-2013 | Hippie420 | Former Forums Manager

  2. #2
    OG/TSD Refugee
    Join Date
    Mar 2011
    Location
    On my porch toking on my pipe
    Posts
    1,657
    Status
    hippie420 is offline
    Gender
    Male
    Country
    United States
    Liked
    3189 times
    Cut 4 17 inch legs with a hack saw


    Then connect the elbows to the 17inch legs like this!

    Then cut 2 17.25"
    "There he goes. One of God's own prototypes. A high-powered mutant of some kind never even considered for mass production. Too weird to live, and too rare to die." Hunter S. Thompson
    Overgrow Original | Sp3cialSt3v3420 | 2001 - 2006 | Overgrow The World
    TSD OG 2011-2013 | Hippie420 | Former Forums Manager

  3. #3
    OG/TSD Refugee
    Join Date
    Mar 2011
    Location
    On my porch toking on my pipe
    Posts
    1,657
    Status
    hippie420 is offline
    Gender
    Male
    Country
    United States
    Liked
    3189 times
    Them cut 2 23.5"

    And then connect them to the 17inch legs with the elbows like so!

    Buy a tub just like this one in the CONCRETE sections of lowes.

    Then if all your measurements were correct it will fit nice and flush like this!
    "There he goes. One of God's own prototypes. A high-powered mutant of some kind never even considered for mass production. Too weird to live, and too rare to die." Hunter S. Thompson
    Overgrow Original | Sp3cialSt3v3420 | 2001 - 2006 | Overgrow The World
    TSD OG 2011-2013 | Hippie420 | Former Forums Manager

  4. #4
    OG/TSD Refugee
    Join Date
    Mar 2011
    Location
    On my porch toking on my pipe
    Posts
    1,657
    Status
    hippie420 is offline
    Gender
    Male
    Country
    United States
    Liked
    3189 times
    Then cut 1 more 23.5" length pvc and 2 more 17.25" pvc and connect them to the bottom for better stability as so!

    So then you end up with THIS!

    Now for the table! You will need Duct tape, 3 1/2 barbs from lowes plumbing section, super glue (of your choice) a drill with a half inch drill bit and a small drill bit as you can see in this picture!

    Now take 2 of your 1/2 barbs and the drill with the small drill bit and drill holes in them like so! I do this so the nute solution will drain all the way when the pump turns off!
    "There he goes. One of God's own prototypes. A high-powered mutant of some kind never even considered for mass production. Too weird to live, and too rare to die." Hunter S. Thompson
    Overgrow Original | Sp3cialSt3v3420 | 2001 - 2006 | Overgrow The World
    TSD OG 2011-2013 | Hippie420 | Former Forums Manager

  5. #5
    OG/TSD Refugee
    Join Date
    Mar 2011
    Location
    On my porch toking on my pipe
    Posts
    1,657
    Status
    hippie420 is offline
    Gender
    Male
    Country
    United States
    Liked
    3189 times
    Then take your drill with the 1/2 bit and drill 3 holes in the bottom of the tub like so!

    Now put the barbs thru the bottom of the tub and super glue them to the bottom them push them thru ALL the way then duct tape them down like this!


    "There he goes. One of God's own prototypes. A high-powered mutant of some kind never even considered for mass production. Too weird to live, and too rare to die." Hunter S. Thompson
    Overgrow Original | Sp3cialSt3v3420 | 2001 - 2006 | Overgrow The World
    TSD OG 2011-2013 | Hippie420 | Former Forums Manager

  6. #6
    OG/TSD Refugee
    Join Date
    Mar 2011
    Location
    On my porch toking on my pipe
    Posts
    1,657
    Status
    hippie420 is offline
    Gender
    Male
    Country
    United States
    Liked
    3189 times
    Repeat the process to the other 2 barbs and you end up with this!


    Now you need some screen that you can buy at wal mart with some small twistie ties you can also buy at wal mart and you cut small square pieces to put around the barbs so your medium you choose to use doesnt get stuck inside the barbs, and you connect like so!

    Now you take the balck tubing that fits the 130-170gph pump and you cut the pices to length to go from the bottom of your table to ur pump and drain tubes like this!
    "There he goes. One of God's own prototypes. A high-powered mutant of some kind never even considered for mass production. Too weird to live, and too rare to die." Hunter S. Thompson
    Overgrow Original | Sp3cialSt3v3420 | 2001 - 2006 | Overgrow The World
    TSD OG 2011-2013 | Hippie420 | Former Forums Manager

  7. #7
    OG/TSD Refugee
    Join Date
    Mar 2011
    Location
    On my porch toking on my pipe
    Posts
    1,657
    Status
    hippie420 is offline
    Gender
    Male
    Country
    United States
    Liked
    3189 times

    2 of the tubes are for draining and 1 is for the pump!

    here are 2 working ebb and flows i just showed you how to build!
    "There he goes. One of God's own prototypes. A high-powered mutant of some kind never even considered for mass production. Too weird to live, and too rare to die." Hunter S. Thompson
    Overgrow Original | Sp3cialSt3v3420 | 2001 - 2006 | Overgrow The World
    TSD OG 2011-2013 | Hippie420 | Former Forums Manager

  8. #8

    Join Date
    May 2011
    Location
    Bostan
    Posts
    6
    Status
    supergrow74 is offline
    Country
    United States
    Liked
    3 times
    This set up for plant growing seems to be cheap and cost effective and suits on small budget.

  9. #9
    Weed Watcher
    Join Date
    Oct 2012
    Location
    Denver
    Posts
    24
    Status
    SkunkyCheese is offline
    Gender
    Male
    Country
    United States
    Liked
    54 times
    Great thread! I just posted a similar setup before I had seen this one. Love building things myself,

    DIY !

Similar Threads

  1. Cheap LED lights?
    By Sexynaudia4u in forum Lighting and Gardening Equipment
    Replies: 3
    Last Post: 08-26-2013, 02:28 AM
  2. need help ebb and flow table feeding schedule plz
    By Ghostdog in forum Hydroponic Cannabis Cultivation
    Replies: 0
    Last Post: 08-05-2013, 11:18 PM
  3. Concerned about low Peak Expiratory Flow Rate
    By WorriedJohnyBoy in forum Introduce Yourself
    Replies: 1
    Last Post: 04-29-2013, 04:34 PM
  4. Home Built Ebb and Flow Pods
    By SkunkyCheese in forum Hydroponic Cannabis Cultivation
    Replies: 1
    Last Post: 11-09-2012, 08:21 PM
  5. Things you shouldn't cheap out on when buying.
    By guywho_is in forum General Discussion
    Replies: 23
    Last Post: 03-09-2011, 03:47 PM

Tags for this Thread


  
ALL content is for informational and educational purposes only,
and intended for visitors 18 Years of age and Older!


  Copyright ©2007-2019 WeedWatch.com Powered by Cannavelli Brands LLC. Sponsors | Link Partners   xhtml valid   Subscribe to Weed Watch Magazine's RSS Feed   
BACK TO TOP